Britain's Largest Automatic Opening Smoke Ventilator



Full Opened Blackwall Ventilator



Advanced Smoke Group finishes the largest Automatic Opening Ventilator in the UK at Blackwall Tunnel

Open Ventilator from the ground

The Northbound Blackwall tunnel constructed over 112 years ago and linking the boroughs of Tower Hamlets and Greenwich has seen a major refurbishment commissioned by Transport for London and awarded to Bam Nuttall. It is one of the busiest commuter roads in London, with over 50,000 vehicles driving through daily and is a vital link from one side of the Thames to the other.

The refurbishment involves a range of upgrades to various systems including drainage storage facilities, CCTV surveillance, fire and life safety systems, modern communication systems and a complete modernisation of the ventilation systems.

The Advanced Smoke Group, specialists in the design of smoke control systems for residential, retail and commercial premises were invited to tender by the consultants as one of only two companies who the consultants felt were qualified to undertake the project. The ventilation contract was awarded to the Advanced Smoke Group who designed, manufactured and installed the automatic opening ventilator for the existing ventilation shafts with dimensions of 8.5 metres in diameter and weight in excess of 8.2 tonnes, making it the largest in the UK.



One 'petal' of the Ventilator



The refurbishment required that a new ventilation system should be installed within the tunnel’s original ventilation shafts built in 1897 and it was decided that an opening roof would allow for the existing shafts to maintain their domed appearance. A mechanical ventilation system was created that would allow for the vents to open in case of an emergency in the tunnel. In the event of an incident or fire in the tunnel, the system will engage in a specific mode to allow for the extraction of smoke. Despite the vast size and weight of the smoke ventilator, the vents are capable of fully opening in sixty seconds.

The automatic smoke vents will help extract smoke and harmful gases from the tunnel in case of a fire, allowing firemen easier access to tackle any blaze.

Richard Brooks, General Manager for the Advanced Smoke Group commented that, “The Blackwall Tunnel project has been a great success and is a perfect example of the engineering expertise within the Advance Smoke Group.”

The system was designed and manufactured at the Advanced Smoke Group premises and Engineering Director for Advanced Smoke Group, Brian Lockton said “the fact we were able to build the Unit in Leicester in the UK, is a great achievement and an example of good British engineering.”



Look at that view



The full feature length video will be available on Youtube shortly. 

Maximising the Efficiency of Car Park Ventilation Systems

Whilst a number of car park ventilation companies nowadays install CO monitoring as a standard feature, little consideration appears to be given to fully exploiting the true potential of environmental monitoring and, consequently, many car parks are still the source of high energy costs.

1. System design criteria – day to day operation and smoke extract

All car park ventilation systems are required to be designed to meet the performance requirements of the current building regulations. The relevant regulations and standards relating to car park ventilation are as follows:

Approved Document F1 – This document sets out the minimum requirements for the day to day ventilation of naturally and mechanically ventilated car parks. It specified the maximum permissible carbon monoxide levels of 30ppm averaged over 8 hours, with levels not exceeding 90ppm for 15 minutes.

With the introduction of carbon monoxide (CO) monitoring within car parks during the last 10 years, car park environmental control has become far more efficient, enabling the ventilation rate to be accurately linked to the level of vehicle exhaust pollution within the car park.

Approved Document B3 – Covers the provision of natural ventilation under fire conditions for “open sided” car parks and mechanical ventilation for those car parks which are “not open sided”.

Naturally ventilated car parks require a minimum 2.5% of the net floor area of the car park in openings linked directly to atmosphere with at least 50% of the opening being split between

two opposing walls. The minimum airflow rate for a mechanically ventilated car park is 10 air changes per hour under fire conditions.

BS7346: Part 7: 2006 – Specifies the requirements for one of three design options,

1. smoke clearance
2. aid to fire fighting and
3. means of escape

The document further sets out standards for controls and powers supplies, the criteria for CFD modelling and for commissioning of systems.

2. Maximum Efficiency System Control

Whilst it is, of course essential to design for a fire condition, most car park ventilation systems are ever employed within a fire scenario. Most car park ventilation system currently installed are notoriously inefficient, simply working on the basis of providing 6 air changes per hour for day to day ventilation or 10 air changes per hour for a fire condition.

Even when the car park ventilation “specialist” designs for a variable rate of ventilation, it is only the main extract fans that are actually controlled, most or all of the jet fans are activated in a day to day ventilation condition with no variation in speed to the jet fans.

Advanced Smoke Group now install the ASG “MAX-EFF” car park ventilation system as standard, employing an addressable CO monitoring system which enables the activation and speed control of not only the main extract fans, but also the impulse fans, thereby maximising the energy saving applied to the system.

In larger car parks, control of the jet fan activation and speed will significantly reduce the power taken by the fans and make corresponding saving in operating costs.

3. Smoke Control

Obviously, it is vitally important to remember that the system may be required to operate in a fire condition, consequently, in order to comply with the latest guidance on the use of smoke extract fans linked to frequency inverters the control of the system must take account of the need to “link out” all protection normally afforded to the fan motor under day to day operation.

The Author

Richard Brooks is the General Manager at Advanced Smoke Group with 30 years experience in the smoke control industry and specialising in car park ventilation for 11 years.

Chairman of the Smoke Control Association 2002-2004 and chairman of the Association's working group on the guide to the ventilation of Loading Bays, Service yards and Coach Parks.

Member of the British Standards Institute Fire Engineering Group (FSH25) and member of the BSI working group drafting BS7346: Part 7: 2006 for car park ventilation

"The beginning is the most important part of the work"



When Maggie met the ASG Team in Leicester



We would like to welcome all visitors to the beginning of Advanced Smoke Group's blog.

This blog will serve as an avenue in which we can share with you our thoughts, our experiences and our future endeavours as well as get your opinions on our opinions.

We will be discussing new ideas; what innovative designs and solutions we have been concocting; projects that we have been diligently slaving away on and our insights into the smoke control industry for the most part.

Articles will be coming from our experts in the Advanced Smoke Group, who will be imparting their expertise and knowledge of the smoke control industry directly onto the blog.

We truly do value any and all comments from anyone who is interested in what it is we say or do and if you would like any further information or ever want to get in contact with us then we will always been happy to listen. There is such a vast array of ways that you can get in touch with us that we’ll save them for the end of the article.

Please keep coming back to check out our articles, we will be updating this space on a regular basis. It was motivation that has got us started but it will be habit that we will keep us coming back.

Oh and the various ways to get in contact with us:

www.advancedsmoke.co.uk/

mail@advancedsmoke.co.uk

www.twitter.com/AdvancedSmoke

www.linkedin.com/company/advanced-smoke-group-ltd

www.youtube.com/user/AdvancedSmoke

Does anyone remember sending letters in the post anymore??